Инструменты пользователя

Инструменты сайта


Installation in Hetzner Cloud

Back to the list of instructions

After installation from the IMG file, MikoPBX will not be able to get the correct settings via DHCP. You need to manually configure the network. See docs.
  1. Open PBX console
  2. Enter commands:
    route add dev eth0
    route add default gw dev eth0
  3. After these commands, the network should function correctly
  4. Go to web interface:
  5. Go to SystemSystem file customization.
  6. Open the file for editing /etc/static-routes.
  7. Select the «To replace all» mode and insert the rule
  8. Reboot MikoPBX
faq/hetzner-cloud.txt · Последние изменения: 2022/04/28 08:06 — Портнов Алексей